Camera & Device Monitoring

Basic monitoring

In the SWARM Control Center, you will find a basic monitoring status on camera as well as device level. This status will show you if your cameras are up and running or if it needs any action to get them running.
In the camera overview of your devices and dashboards, you will find the camera monitoring, which tells you if your camera is working as expected. In device configuration, you find the device monitoring, which shows a warning in case that at least one camera has an issue.
Please consider that the status will be updated every 5 min.

Camera monitoring

The monitoring is taking into consideration the software, camera input as well as MQTT connection.
Camera Status
Description
Everything is fine. Your camera is running as expected.
Software is running smoothly, camera connection is available and MQTT broker is connected.
The camera is missing the configuration.
You need to configure the camera and data connection as well as your specific configuration according to your use case.
Something unexpected happened.
There is an issue on the camera of the device. Check more details on the device logs.
Check if camera connection is available if you can't find any issue with the camera please contact SWARM support with relevant information. (Attache device logs to support ticket
The Perception Box or your hardware is offline. Check if the hardware is connected to the power supply and has a running network connection.
When you just have changed the configuration the status will go on pending for approx. 5 minutes until the good status will be determined.

Device monitoring

The device monitoring is depending on the worst status of the stream monitoring in order to give you an overview in your device list on devices where a camera is not working as expected.
Camera Status
Description
Everything is fine. All the cameras configured on your device are running as expected.
At least one of the cameras on the device is missing the configuration. Check the camera monitoring status for more details.
At least one of the cameras on the device has an issue and is not sending data as expected.
The device is offline. Check if the hardware is connected to the power supply and has a running network connection.
When you just have changed the configuration from one of the cameras on the device, the status will go on pending for approx. 5 minutes until the good status will be determined.
Last modified 1d ago
Export as PDF
Copy link