Set-up Traffic Counting

You want to know the traffic situation of an urban street or highway? SWARM software is providing the solution to get the number of vehicles passing at the street split per vehicle type (Classes) and direction.
What data can be generated? 
For this use case, SWARM software is providing you with any data needed for traffic counting - The counts of vehicles including classification can be covered. The counts are split between two directions (IN/OUT). On top, several counts can be made in one video camera, e.g.: count each lane separately. 
All SWARM classes are detected.
What needs to be considered for a successful analysis?
Camera Set-up
How to configure?
How to get the data?
Find detailed information about camera requirements/settings as well as camera positioning in the table below. 
​
Recommended
​Pixels per Meter (PPM)​
Pixels Per Meter is a measurement used to define the amount of potential image detail that a camera offers at a given distance.
> 30 PPM (vehicle)
> 60 PPM (rider, person)
Using the camera parameters defined below ensures to achieve the minimum required PPM value)
Tip: Use the Axis lens calculator or generic lens calculator.
Camera video resolution
1280×720 pixel
Camera video protocol/codec
RTSP/H264
Camera Focal Length
2.8mm
Camera mounting - distance to object center
​
 
5-30 meters (vehicle)
5-15 meters (rider, person)
Camera mounting height
​
 
3-6 meters
Camera mounting - vertical angle to the object
​
 
<50°
Note: setting the correct distance to vehicle and camera mounting height should result in the correct vertical angle to the vehicle
Camera mounting - horizontal angle to the object
 
 
0° - 90°
Wide Dynamic Range
Can be enabled
​
​
Possible Camera for this use case
Camera
​
Link
Comment
HikVision 
Dome Camera    
DS-2CD2045FWD-I(2,8mm)
​https://www.hikvision.com/en/products/IP-Products/Network-Cameras/Pro-Series-EasyIP-/DS-2CD2045FWD-I/​
2,8mm Focal Length
The configuration of the solution can be managed centrally in SWARM Control Center. Below, you can see how a standard traffic counting needs to be configured for optimal results.
In order to start your configuration, take care that you have configured your camera and data configuration.​
Configuration settings
Configuration
​
Model
Traffic & Parking
Configuration option
CL (Counting Line)
ANPR
Disabled
Raw Tracks
Disabled
How to place the configuration type?
For receiving the best accuracy of the counting including the classification, the Counting Line should be placed approx. in the middle of the video frame so that vehicles from both directions are seen long enough for good detection and classification. 
You can choose the direction IN/OUT as you want in order to retrieve the data as needed.
                                                    
​
Visualize data
You can visualize data via Data Analytics in different widgets.
​
Scenario
In our Traffic Scenario section, you can find more details about the possible Widgets to be created in the Traffic Scenario Dashboards.
Traffic Scenario
​
Example 
Here is an example for a Traffic counting widget You have the different options to choose the data you want for a certain time period as well as choosing the output format (e.g.: bar chart, table, ...).
Traffic Counting Widget
Retrieve your data
If you need your data for further local analysis, you have the option to export the data of any created widget as csv. file for further processing in Excel. 
csv. export
If you would like to integrate the data in your IT environment, you can use the API. In Data Analytics, you will find a description of the Request to use for retrieving the data of each widget.
REST API
Environment specification
Object velocity
 < 130 km/h
Day/Night/Lighting
Daytime/Well illuminated/Night vision
Indoor/Outdoor
Outdoor
Expected Accuracy (Counting+Classification)
(when all environmental, hardware, and camera requirements met)
>95% (vehicles, bicycles)
Hardware Specifications
Supported Products
VPX, P100/OP100/StarterKit
Frames Per Second
25
​